Hi



As promised, here is the finger friendly input panel I've been working on. It is intended for users of 800x480 devices, and the size has been optimised to work with SkyDemon as far as possible.







The DLL and a copy of regsvrce can be found here



I can't really give any support for installing this at the minute, but the instructions are as follows:-



Copy both files into the Windows folder of your device.

Launch regsvrce.exe

Enter 'skysip.dll' into the box and tap OK

You now need to select the SkyDemon SIP. There are various ways of doing this - you can either do it in control panel, or by tapping the keyboard/pencil icon at the bottom right of the taskbar.



If you don't have access to your desktop, then you won't be able to use this for now.



I am planning in the future to package it up so it will work on devices that don't have access to the Windows CE shell. It shouldn't be an issue to integrate it into MioPocket for those people who are using that.



Please do not pester me about this though. It'll be done when it's done! Alternatively, now I've done the difficult bit, perhaps someone else could package it?



Steve

Hi folks,



I've re-packaged my original bundle which can be found here.



Extract this zip file (including the folder) to the root of your SD card, then point your navigation link at SkyDemonLaunch.exe.



If you have a device where you need to rename the executable in order to launch SkyDemon, rename both SkyDemonLaunch.exe and SkyDemonLaunch.mscr to the name you need (for example FreedomCE.exe and FreedomCE.mscr), and place them on the root of your SD card along with MortScript.exe.



The files in this archive have been tested on Windows CE 5.0, Windows Mobile 5.0 and Windows CE 6.0.



The script automatically detects your screen resolution, installs and registers the correct SIP, then activates it before finally launching SkyDemon (which it expects to find either in the root of the SD card or in a folder called SkyDemon).



Regards,



Steve

Steve, thanks for all the time and effort you have put into this, but dispite your best efforts on my personal behalf I'm still not getting anywhere. This has nearly become a fulltime issue, I've spent hours on it..

Firstly, I copied all the files you were good enough to put in the nje folder, into the windows folder of my device. I then went into the windows folder on my device and attempted to double click the regdll.exe, but nothing happened. I loaded  (overcopied them)  9 times into the windows folder but no luck. So I then tried your latest all singing and dancing  self automated file.I folowed your instructions and set the navpath to skydemonelaunch.exe and off it went, Skydemon loaded up no trouble, but unfortunately no large keyboard, still the poxy little one. One thing I did notice though, when skydemon started to load something popped up on the screen in the top lefthand corner which I think said something like 'SD SIP enabled'  Thank you very much for your so far, but I think I'll have resign myself to the fact that either me or the device is defective, and I'm not really sure it's the device.

Thanks